Equipment
· ASE, SLED Sources
· DFB Laser Source Bank
· Pulse Laser, Femtosecond
· Tunable, Swept Laser
· EYDFA Amplifier
· EDFA Amplifiers
· YDFA Amplifier
· Amplifier, Raman, SOA
· Fiber Laser, High Power
· RF over Fiber, Analog
· Optical Network Tx / Rx
· HFC/CATV, xPON
· Fiber Sensor, FBG
· Bit Error Rate Tester
· Portable Instruments
· Power Supplies
· Optical Heterodyning System

Components
· Space Qualified Products
· Optical Modulators
· DFB LD
· Variable Opt. Atten.
· RF Amplifier, Devices
· Photodiodes / Receivers
· Tunable Filters / Switches
· DWDM Mix, Add/Drop
· WDM, Optical Filters
· Passive Components
· Patchcords / Adaptors
· Fiber Assembly Housing


Manufacturers

You are at OEQuest

Welcome to OEQuest

The largest online source for fiber optics, EDFAs, photonics devices, optical components, and more. Thousands of products in stock, ready for delivery.

To begin, click on one of the categories to the left. New or Returning Customer? Start here.


Featured Products

Raman Amplifier, Rackmount, C+L-Band, 1525nm to 1605nm
The Optilab RA-CL-18-R Raman Amplifiers are optical fiber amplifiers that are designed to recover optical loss incurred in optical fiber, thus extending the transmission distance.
Low Noise, High Gain Pre-Amp EDFA Module, 50 dB Narrowband Gain
The Optilab EDFA-PA-LN-M Pre-Amp EDFA is a low noise and high-gain module for amplifying low input level signals that is an easy-to-use and cost-efficient solution for photonic subsystems, OEM integration, free space communication, and satellite/ground link. Using a dual stage design, this module provides over 50 dB gain with maximum 4.5 dB noise figure and is designed to amplify signal with a low input level as low as -50 dBm.

4 Channel Lightwave Modulator for 1270/1290/1310/1330nm, 40 Gb/s
The Optilab LM-40-4-CWDM is a 4-Channel high-performance lightwave modulator designed for digital applications up to 40Gbps operating at O-band CWDM wavelength, paired with our DFB-4-B-CWDM source for a four channel optical transmitter system.

1064 nm, 12 GHz Bandwidth Intensity Modulator, SM Output
Full Production Line! The Optilab IM-1064-12-PM Intensity Modulator is designed for external modulation of a 1064 nm laser, with a usable S21 bandwidth of 12 GHz, and a minimum 3 dB bandwidth of 12 GHz.

1550nm Phase Modulator, 5GHz, PM Fiber Input, PM Fiber Output, FCA
The Optilab PM-1550-5 phase modulator is a high performance, 5 GHz LiNbO3 modulator. This modulator can provide phase modulation with a low driving voltage. Its low insertion loss provides for its maximum transmission power. The PM-1550-5 modulator uses polarization maintaining (PM) input and output fibers, making it easy to integrate with other optical components.

Dual 40 GHz Modulator Driver/RF Amplifier
The MD-40-X2-R is a dual channel, 40 Gb/s Bandwidth RF Amplifier, enclosed in a single 1U rackmount housing. Each channel on the MD-40-X2-R provides a high-quality, single-ended voltage to drive an external LiNbO3 modulator, with independent control and monitoring on all amplified signals.

BT48 Par BERT/Serial BERT 48 Gb/s
The Optilab BT48 is a bit error rate tester system that consists of two benchtop units, BT3X16 and BT24X2. The BT48 can be configured to a dual channel 24 Gbps serial BERT by using BT24X2 as the pattern geneartor and BT3X16 as the error analyzer.

Oak Creek Fiber Sensing Interrogator
Based on Sedona platform, the Oak Creek Fiber Sensing Interrogator (FSI-OC) is the next generation in high performance fiber sensing. The FSI-OC was developed with an advanced photonics sensing module integrated inside Optilab’s Sedona platform. Please see our Youtube video for more information.


Call 1-602-343-1496 For More Information
International customers, please call (480) 719-1502.


Visa, Mastercard Accepted Here

 

 
 
 Copyright (c) 2018 Optilab, LLC. All Rights Reserved | Terms of Service | Privacy Policy