| |
 |
US TOLL FREE: 602-343-1496
|
|
| |
You are at
OEQuest : 37 dBm, Er/Yb Doped Fiber Amplifier, Module
| 37 dBm, Er/Yb Doped Fiber Amplifier, Module |
|
 |
The Optilab EYDFA-37-M is designed to amplify optical signals up to 37 dBm average power for high power applications at 1550 nm wavelength range. The EYDFA-37-M incorporates two stages of amplification based on multi-mode pumping technology using Er/Yb double clad fiber. The optical gain of the amplifier exceeds 35 dB via the EDFA pre-amplifier, which allows a low input signal level of -20 dBm. The EYDFA-37-M utilizes large core fiber technology to remove Raman scattering, which causes nonlinear amplification and is equipped with LabVIEW (TM) user interface and remote control. The EYDFA-37-M can be ordered with an SMF collimator and other options. Contact Optilab for more information.
Options
• Adding a Input stage EDFA to allow low input signal level of -20 dBm
• Installing an ASE (Amplified Spontaneous Emission) filter for pulse amplification
• Output power monitoring
• Polarization Maintaining (PM) fiber design
Features
• 1540nm to 1570nm amplification
• Up to 5W CW output power
• High gain of 35 dB with Pre-amp option
• Large Core Fiber Technology
Downloadable PDF Datasheets:
EYDFA-37-M Datasheet
Downloadable Images:
EYDFA-37-M Larger Image (120191 bytes)
 Manufacturer: Optilab
Part Number: EYDFA-37-M
Shipping Weight: 0.00 lbs
Lead Time:
6-7 Weeks
Base Price: $12,700.00
|
| Technical Specifications |
| Model Number |
EYDFA-37-M
|
| Operating Wavelength Range |
1540-1570nm
|
| Output Power |
+36.5dBm minimum
|
| Input Signal Level |
-20dBm to +3dBm (with Pre-amp)
|
| Optical Gain |
35dB @ -3dBm, typical
|
| Noise Figure |
5.0dB @ 0dBm, typical
|
| Input Isolation |
30dB typical
|
| Output Isolation |
30dB typical
|
| Polarization Exinction Ratio |
20dB typical (PM Option)
|
| Control Mode |
ACC Standard, APC (optional)
|
| Environment / User Interface |
|
| Display |
Remote Interface
|
| Controls |
Keylock Switch, Pump Laser Current
|
| Monitors |
Input Power, Output Power
|
| Protection |
Pump Laser Over-Temperature
|
| Computer Interface |
RS232, Labview software CD-ROM included
|
| Optical Fiber Type |
SMF-28
|
| Optical Connectors |
FC/APC Standard
|
| Electrical Connector |
RS232 - Cable Included
|
| Power Supply |
4V, 25A (External)
|
| Dimensions |
Without Heat Sink:
180mm(L) x 140mm(W) x 43mm(H)
With Heat Sink:
180mm(L) x 140mm(W) x 56mm(H)
|
| Operating Temperature Range |
0˚C to +50˚C
|
| Storage Temperature Range |
-40˚C to +70˚C
|
|
|
|
|
|
|
|
|
|
|
|
