|
|
US TOLL FREE: 602-343-1496
|
|
|
You are at
OEQuest : 30GHz Photodiode, K-type, AC Coupled
30GHz Photodiode, K-type, AC Coupled |
|
|
The Optilab PD-30-M is a 30 GHz photodiode module designed for RF over Fiber, antenna remoting, and broadband RF transmission applications using single mode optical. The PD-30-M can accept input power of up to 50 mW. The PD-30-M utilizes a high input power, low distortion PIN photodiode that provides optical to RF conversion out to the frequency range beyond 30 GHz. This compact, cost-effective receiver module can provide users with status monitoring through the use of an on-board processor that communicates to a host computer over an RS-232 I/O interface via a standard USB 2.0 port. When the PD-30-M RF over fiber receiver module is linked with the LT series of RF over fiber transmitter modules, the combination provides an excellent solution for ultra-wideband RF to fiber conversion applications, go to optilab.com for more details.
Features:
• Ultra-wide Bandwidth up to 30 GHz
• High Dynamic Range
• High Input Power Handling Capacity of 20 mW
• Highly Linear for Analog Signals Transmission
• No TIA for Intrinsic Phase Linearity
• Status Monitoring: RS-232 (standard)
• Power and Remote Monitoring via USB Port
Applications:
• Wideband RF Transmission over Fiber
• RF/IF Signal Distribution
• Satcom Microwave Antenna Signal Distribution
• EW Systems
• Broadband Delay-line and Signal Processing
• LIDAR Receiver
• Phased and Interferometric Array Antenna
Downloadable PDF Datasheets:
PD-30-M Datasheet
Downloadable Images:
Image (0 bytes)
Manufacturer: Optilab Part Number: PD-30-M-K-AC
Shipping Weight: 2.00 lbs
Lead Time:
4-5 Weeks
Base Price: $1,750.00
|
Technical Specifications |
General Specifications |
|
Photodiode Wavelength Range |
1000 nm to 1650 nm
|
Operational Bandwidth |
60 KHz to 30 GHz
|
Optical Input Level |
10 mW average, 20 mW peak
|
Repsonsitivity |
1.0 A/W @ 1550 nm typ. 0.90 A/W @ 1310 nm typ. 0.40 A/W @ 850 nm typ.
|
S21 3 dB Bandwidth |
29 GHz min., 31 GHz typ.
|
S22 Characteristics |
< -10 dB @ 20 GHz
|
Optical Return Loss |
-30.0 dB typ.
|
2nd Harmonics Distortion |
-70.0 dBc max.
|
3rd Harmonics Distortion |
-75.0 dBc max.
|
Optical PDL @ 1550 nm |
0.05 dB max.
|
Output Coupling |
AC Coupled
|
RF Impedence |
50 Ω
|
Ripple over Bandwidth |
±1.0 dB max.
|
Link Performance with LT-20 |
|
SFDR |
113 dB Hz2/3
|
Link Loss |
-20 dB @ 10 dBm optical
|
Mechanical Specifications |
|
Operating Temperature |
-10º C to +50º C
|
Storage Temperature |
-20º C to +80º C
|
Power Supply Requirements |
+5 V DC, 500 mA max.
|
Optical Connector |
FC/APC, SC/APC Optional
|
RF Input Connector |
K Connector Female, 50 Ω
|
DC Connector |
Plug-in typ.
|
Local Alarm |
LED: Optional Input Power
|
Remote Alarms |
RS-232 Interface (Standard) via USB
|
Dimensions |
82 mm x 56 mm x 25 mm
|
Accessories Included |
110 V - 240 V AC USB Adaptor & Cable
|
Housing |
Precision Mach. Anodized Aluminum
|
|
|
|
|
|
|
|
|
|